Comments on: 39.2 Khz signal modulated at 1200baud for Robosapien http://profmason.com/?p=448 Thu, 03 Jun 2010 20:51:24 +0000 http://wordpress.org/?v=2.9.2 hourly 1 By: profmason.com » Decoding VExplorer Remote: http://profmason.com/?p=448&cpage=1#comment-499 profmason.com » Decoding VExplorer Remote: Wed, 26 Dec 2007 08:15:27 +0000 http://profmason.com/?p=448#comment-499 [...] pulse stream. This should be a pretty straight forward adaption of the techniques I used in the Robosapien project. I am not sure if I need to encode the carrier or not? (It seems like the transmitter section might [...] [...] pulse stream. This should be a pretty straight forward adaption of the techniques I used in the Robosapien project. I am not sure if I need to encode the carrier or not? (It seems like the transmitter section might [...]

]]> By: profmason.com » High Powered IR Transmitter http://profmason.com/?p=448&cpage=1#comment-494 profmason.com » High Powered IR Transmitter Wed, 19 Dec 2007 00:56:39 +0000 http://profmason.com/?p=448#comment-494 [...] both the RoboSapien and the Roboquad project, I used an IR transmitter consisting of a Picaxe driving an IR LED. The IR [...] [...] both the RoboSapien and the Roboquad project, I used an IR transmitter consisting of a Picaxe driving an IR LED. The IR [...]

]]> By: profmason.com » Voice Controlled RoboQuad http://profmason.com/?p=448&cpage=1#comment-488 profmason.com » Voice Controlled RoboQuad Tue, 04 Dec 2007 08:24:13 +0000 http://profmason.com/?p=448#comment-488 [...] adapted the Robosapien Control unit by changing the IR header from 0011 to 0110.  I finally found a set of Roboquad IR commands at [...] [...] adapted the Robosapien Control unit by changing the IR header from 0011 to 0110.  I finally found a set of Roboquad IR commands at [...]

]]> By: profmason.com » Controlling Robosapien from roborealm http://profmason.com/?p=448&cpage=1#comment-485 profmason.com » Controlling Robosapien from roborealm Wed, 28 Nov 2007 09:26:21 +0000 http://profmason.com/?p=448#comment-485 [...] completing the PicAXE based Robosapien control unit, I wanted to interface it to Roborealm.  Since the PC Robosapien interface I built just takes [...] [...] completing the PicAXE based Robosapien control unit, I wanted to interface it to Roborealm.  Since the PC Robosapien interface I built just takes [...]

]]>